Mold Assessments for Remediation
A mold assessment is an evaluation for mold with a remediation plan report that is specific to each remediation project and is performed pre mold remediation and a clearance is performed post mold remediation.
When possible, the underlying sources of moisture that may be causing the mold and a recommendation as to the type of contractor who would remedy the source of such moisture.
Mold remediation plan will specify:
The rooms or areas where the work will be performed.
The estimated quantities of materials to be cleaned or removed.
The methods to be used for each type of remediation in each type of area.
The personal protection equipment (PPE) to be supplied by licensed remediators for use by licensed abaters.
The proposed clearance procedures and criteria for each type of remediation in each type of area.
Recommendations for notice and posting requirements that are appropriate for the project size, duration, and points of entry.
A broad estimate of cost and time frame for completion.
The remediation plan may require containment, as appropriate, to prevent the spread of mold to areas of the building outside the containment under normal conditions of use.
Disinfectant, biocide, or antimicrobial coating may be used on a mold remediation project shall indicate a specific product or brand only if it is registered by the United States Environmental Protection Agency for the intended use and if the use is consistent with the manufacturer's labeling instructions and take into account the potential for occupant sensitivities
Cost of assessments are unique to each project and vary, please call or email for estimate. Average $650 whole house evaluation, or $350 per area of concern. Clearance Inspection: $175.
A mold in air sample consist of timed and measured air sampling with Air Trap Cassettes which are laboratory processed for mold count and type. A report of the results is generated to help determine the potential mold exposures to the occupants within the building. An outside air sample is taken as a comparative to the indoor air sample/s creating two sample minimum.
Mold in air testing the time of assessment - $175.00 (includes the comparative outdoor sample and 1 interior sample) $100 for each additional air sample.
Medium, larger, and/or multiple level homes may require additional air samples depending on scope.
Mold Surface Sampling
A tape lift or swab bulk sample is taken from a surface suspected to have mold growth and sent to a laboratory for growth identification
Surface sample taken at the time of assessment - $100.00
